If at anytime you are struggling, reach out to our support team on support@trackingdirect.com
*Support available in English and Spanish. We aim to answer any support inquiry within two working days
Scope
This document describes the Tracking Direct FMB001 installation requirements.
Transfer of product
The Tracking Direct FMB001 product once installed and recorded on the Tracking Direct database is transferable between vehicles. This must be done in conjunction with our support forms to allow Tracking Direct database updates.
FMB001 kit components
FMB001 unit
FMB001 extension cable (if required)
Installation of the unit
Record what IMEI No. & Serial Number is being fitted into what Vehicle Registration
Connect the OBD Extension Cable (if required) to the OBD Port of the vehicle and install the PnP unit behind the dashboard whilst ensuring the label on the box is pointing towards the sky
Need help finding the OBD port?
If located in the United Kingdom, Germany or France, you can use the button below to help finding your vehicles OBD port.
If not located in these countries, please refer to your vehicles manual for further assistance.
They are two LED’s at the rear of the unit, if they are both blinking every second then the unit is operating as expected. If they are not then the installer must contact Tracking Direct for further analysis.
If the installation is for anything else other than a standard install, then the engineer must contact Tracking Direct to commission remotely.
*Support available in English and Spanish. We aim to answer any support inquiry within two working days
Register tracker
If unit is working as expected from a hardware point, navigate to trackingdirect.com/activation-page/ to register your tracker.